Product information
Unitor™ Ferrous Wear Meter (FWM) is constructed using a sophisticated magnetometer adapted for field applications. A 5 ml test tube, filled with the sample, is placed directly in the hole in the instrument and its metallic content, in PPM, is displayed on the screen in less than 2 seconds. No further sample preparation is required and the ferrous debris content is displayed instantly on the easy to read screen, providing you with a quick, simple and clean method of analysis. Simple graphical instructions are displayed on the screen, requiring little or no training for users to operate.
It is a rugged, simple, easy to use instrument provides instant, accurate measurements of ferrous wear content on the units screen. Contained in a fully portable case, its rugged design is ideal for testing and analysing oil samples both on-board, in the field or in the laboratory.
Features
- Suitable for testing on-board, on-site or in remote locations.
- Simple, easy to operate instrument requiring minimal training.
- Direct reading in PPM on the LCD screen within 2 seconds
Benefits
- Gives you a quick answer on the wear in your engine
- Your crew can easily do the test within minutes with minimal training
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-9 |
|---|
Dimensions/Weight
| Dimensions L x W x H [mm] | 480 x 370 x 165 |
|---|---|
| Weight [kg] | 1.1 |
Technical data
| Display resolution [pixel/inch] | 5 ppm between 0 and 2495 ppm 10 ppm between 2500 and 9990 ppm 0.01 % between 1.00 and 9.99 % 0.1 % between 10.0 and 15.0 % |
|---|---|
| Operating temperature [°C] | 15 – 40 (60oF – 104oF) |
Performance data
| Accuracy | +/- 10 ppm (0 – 1000 ppm), +/- 20 ppm (> 1001 ppm) |
|---|---|
| Measurement Range | 0 – 2500 ppm; 0 to 15% by mass (mg/kg) |
| Test time | < 3 seconds per sample |
